1-component silane-modified polyurethaneadhesive for parquet flooring.
Content: 3 bags of 7 kg each = total 21kg
Suitable for the stress-free bonding of 10 mm solid parquet, mosaic, strip and pre-finished parquet, lamella parquet, as well as 15-22 mm solid wood planks and wood paving.
BergerBond M1 is solvent-free and contains no water, is very low-emission overall and is characterized by high adhesive strength, fast initial adhesion and strong, rapid curing. Shrinkage and swelling-free bonding is guaranteed. Adhesive residues are easily removable.
Cures shrinkage-free, good adhesion to almost all substrates and wood-based materials | Water and solvent-free, therefore no swelling of the wood | good rib stability and long open time | very low emission
Application: If necessary, bring adhesive to room temperature before use. The components are matched to each other in the correct mixing ratio so that they can be fully added to each other and then thoroughly mixed (preferably with an appropriately equipped hand drill) until a uniform color is achieved. Apply the adhesive to the substrate with a notched trowel within the pot life of approx. 70 minutes and place the flooring element into the adhesive bed within an open time of approx. 110 minutes and tap it thoroughly. Open joints that are to be sealed directly must not contain any adhesive. For tropical woods with a high fat/oil content, please inquire about suitability!
Shipping via parcel service/freight forwarder
For larger quantities, please contact us.
