Berger-Seidle Classic BaseOil – farbloses Parkettöl

Solvent-free, colorless deep impregnation for wooden floors. Based on natural, renewable raw materials. Can be combined with oils, oil/wax systems and approved seals from Berger-Seidle.

The surface to be treated must be completely clean and dry after the last fine sanding. Apply the material in several coats until fully saturated. After a penetration time of 30 to 60 minutes, buff off the excess oil with a single-disc machine and a soft pad. For combined applications with water-based lacquers, Classic BaseOil must be mixed with Classic Plus. When used in the module system, observe the instructions in the technical data sheet.

Consumption: depending on the substrate - approx. 20-50 g/m²

The drying time under ideal conditions (23°C/50% rel. humidity) is 24 hours. Drying can be significantly delayed by poor ventilation, lower temperatures, different humidity levels, or increased layer thickness. Do not mechanically stress or expose to water, lay carpets, or maintain for at least 8-14 days.